We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Brodit 713224 holder Active holder Tablet/UMPC Black
SKU
713224
Product colour | Black |
---|---|
Proper use | Car |
Mobile device type | Tablet/UMPC |
SKU | 713224 |
EAN | 7320287132243 |
Manufacturer | Brodit |
Availability | In Stock |
Fits for devices with original skin. With tilt swivel. With Easy-switching system.
Use an active holder for your Galaxy Tab Active while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient! 12/24 Volt. The product is E-approved. Connect the power cable with a 2A fuse. 2A charger. Charging via pogo plug. Professional installation recommended.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
Use an active holder for your Galaxy Tab Active while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient! 12/24 Volt. The product is E-approved. Connect the power cable with a 2A fuse. 2A charger. Charging via pogo plug. Professional installation recommended.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
Design | |
---|---|
Orientation | Horizontal/Vertical |
Mobile device type | Tablet/UMPC |
Compatibility | Samsung Galaxy Tab Active 2 SM-T390/SM-T395 Samsung Galaxy Tab Active 3 SM-T570/SM-T575 |
Type | Active holder |
Proper use | Car |
Product colour | Black |
Material | ABS, Acetal, Plastic |
Technical details | |
---|---|
Mobile device type | Tablet/UMPC |
Compatibility | Samsung Galaxy Tab Active 2 SM-T390/SM-T395 Samsung Galaxy Tab Active 3 SM-T570/SM-T575 |
Type | Active holder |
Proper use | Car |
Product colour | Black |
Material | ABS, Acetal, Plastic |
Weight & dimensions | |
Width | 238 mm |
Depth | 50 mm |
Height | 155 mm |
Weight | 460 g |
You may also be interested in
Product |
![]() |
![]() Bestseller
Motorola 21-52612-01R holder Passive h...
Login for pricing
|
![]() Hot Product
RAM Mounts X-Grip Universal Holder for...
Login for pricing
|
![]() New
Compulocks Universal Tablet Cling Wall...
Login for pricing
|
![]() Recommended
Compulocks VESA Flex Arm Mount Black
Login for pricing
|
![]() Popular
Compulocks VESA Portable Floor Stand B...
Login for pricing
|
---|---|---|---|---|---|---|
SKU |
713224
|
21-52612-01R
|
RAM-HOL-UN11U
|
UCLGVWMB
|
159B
|
147B
|
Manufacturer |
Brodit
|
Zebra
|
RAM Mounts
|
Compulocks
|
Compulocks
|
Compulocks
|
Product colour |
Black
|
N/A
|
Black
|
Black
|
Black
|
Black
|
Proper use |
car
|
indoor
|
N/A
|
indoor
|
indoor
|
indoor
|
Mobile device type |
Tablet/UMPC
|
Barcode scanner
|
Tablet/UMPC
|
Tablet/UMPC
|
Tablet/UMPC
|
Tablet/UMPC
|